Snipe Trailing/Mooring Cover-Acrylic Blue-None Reviews
Trailing Mooring Cover (T-M) Full deck cover to use for both trailing and mooring. Lies flat over the deck for trailing and can be drawn up for water runoff while mooring. Has 5/16" elastic shock cord in the hem to hold 6" under the rub-rail, tie-down points, heavy duty nylon zipper, mast collar with drawcord closure, and flaps that snap around stays. Reinforcements are at back corners, fairlead areas, cleat areas, and splashrails. Does not fit over the boom when boom is in crutch with mast up. Store boom in cockpit. To use cover over the mast for trailing requires that the mast be no higher than 10" to 12" above the deck where the mast steps and no higher than 3" above the transom. Polyester Superior protection and very tough. Specially finished to our specifications. Non-shrinking, non-stretching, non-absorbent, mildew resistant 100% polyester army duck 14 oz. per yard. Superior combination of water repellency and abrasion resistance. Outstanding for trailing and excellent resistance to sun's UV damage. Lasts longer than acrylic or canvas. Acrylic 100% acrylic fiber silicone coated for water repellency. Very resistant to rot, mildew, shrinking, fading, or stiffening. Breathable acrylic marine duck is a long lasting mooring cover material due to its excellent resistance to damaging UV rays of the sun. White acrylic is best for your boat due to its much lower heat retention. However, colored acrylic does last longer due to the dye in the fabric. Ideally suited for well-sloped enclosures as leaks when flat. Low abrasion resistance so not as tough as poly for trailing. Also, we do not recommend acrylic for trailing.
No comments:
Post a Comment